12
INSTALLATION INSTRUCTIONS (continued)
Connecting Antenna / Cable TV Signal
Make sure that the power switch of the TV is turned off.
1. TV IN connector (Analog) Connect an antenna or a cable TV box using the coaxial cable
2. HDMI IN connector Connect devices such as a DVD player or set-top box
3.PC Audio connector for VGA Connect the audio cable from your computer
4.VGA connector Connect to the VGA cable from your computer to the TV
5. Component audio and video connectors (AV3/AV4 IN) Connect devices such as a DVD player, set-top box, or cable TV box
6. AV-out & Subwoofer audio out connectors AV-out connect devices such as a VCR, Subwoofer audio out connect an optional powered subwoofer to the TV.
7. Composite video, S-Video and audio connectors (AV1 IN) Connect devices such as a VCR or DVD player
8. Side I/O (AV2 IN) S-Video , composite and audio connectors Connect devices such as a video game system or a DVD player and turn on or turn off the
Main power switch the power of your appliance.
9. Power connector Connect your power cord
Precautions when connecting the antenna
Use a coaxial cable which is free from interference. Avoid using a parallel flat wire as interference may occur, causing the reception to become unstable and
noise to appear on the screen.
Avoid using an indoor antenna as this may be affected by interference and poor reception.
Keep the power cord as far away from the antenna wire as possible.
VHF(300-Ohm) antenna / UHF antenna
When using a 300-ohm twin lead from an outdoor antenna, connect the VHF or UHF antenna leads to the screws of the VHF or UHF adapter. Plug the
300-ohm to 75-ohm adapter into the antenna terminal on the TV.
When both VHF and UHF antennas are combined
Attach an optional antenna cable signal combiner to the TV antenna terminal, and connect the cables to the antenna mixer. Consult your local
electronics retailer.
TV rear panel
