background image

8

6 0 0  S E R I E S  T R E A D M I L L   O W N E R’ S  M A N U A L

Upright Posts Assembly

1. Connect the wire harness connectors before assembling Left up-

right post into the upright post receptor of the base frame.

2. Slide the Left upright post into the receptor, insert 4 bolts with

washers,  and  slightly  tighten  with  an  Allen  wrench.  Be  careful
not to pinch the wire harness when installing.
 (See figure A.)

3. Assemble  the  Right  upright  post  with  the  same  procedure  as

Left  upright  post.  Do  not  tighten  these  bolts  until  the  console
assembly has been installed.

The Horizontal Handlebar

1. Insert the Horizontal handlebar into Left and Right upright posts.

(See Figure E.)

2. Secure handlebar with long bolt and washer on the left side and

short bolt and washer on the right side. Be sure not to pinch the
wire harness inside the left upright post.

3. Slightly  tighten  these  two  bolts  with  an  Allen  wrench.  Do  not

tighten these bolts until the console assembly has been installed.

Figure E

Console Assembly

1. Connect the wire harness from the console with the wire harness

from Left upright post before sliding the console assembly into
the upright posts. Any excess wiring must be carefully inserted
(store) back into the handlebar before installing the console onto
the upright posts. Be careful not to pinch the harness when
assembling.

2. Fasten the console assembly by inserting 2 bolts and washers

on  the  back  of  the  console  on  each  side.  Tighten  these  bolts
with an Allen wrench. (See Figure F.)

3. Now tighten the 5 bolts on each side of upright posts and

upright brace and one bolt on each side of horizontal handlebar.

4. Make sure all hardware on the treadmill is securely tightened.

Figure F

650T Assembly Instructions

Figure D

Summary of Contents for 650T
























Reviews: