19
Console Layout (Continued)
Press the
1.
USER ZONE
key.
Press the
2.
ENTER
key when the
“USER SETUP”
message comes on, in the message display.
Using either the
3.
UP
or
DOWN
keys fi nd your profi le and press the
ENTER
key.
Press either the
4.
UP
or
DOWN
keys until the message
“REVIEW TOTALS”
comes up.
Press the
5.
ENTER
key.
At this point Use the
6.
UP
and
DOWN
keys to review your workout data.
TOL TIME = XXXXHR
•
– this is the total time you have worked out in hours.
TOL CAL = XXXX
•
– this is the total calories burned since the user data was last cleared.
TOL DIS = XXX.XMI
•
– this is the total distance traveled since the user data was last cleared.
When the message
7.
“EXIT”
comes up in the display press the
ENTER
key to exit from reviewing
your totals and reset the console to Idle mode.
Clear Totals
D.
To clear your user totals, follow the procedure below:
Press the
1.
USER ZONE
key.
Press the
2.
ENTER
key when the
“USER SETUP”
message comes on, in the message display.
Using either the
3.
UP
or
DOWN
keys fi nd your profi le and press the
ENTER
key.
Press either the
4.
UP
or
DOWN
keys until the message
“CLEAR TOTALS”
comes up.
The message
5.
“CLEAR TOTALS = YES”
will come on with Yes blinking.
Press the
•
ENTER
key when the Yes is blinking and the totals will reset to 0.
Use the
•
UP
or
DOWN
keys to change the Yes to No. Pressing the Enter key when No is
blinking will not reset your totals.
After pressing the
6.
ENTER
key the Console will also reset to Idle mode.
Measuring Units Setting
E.
The measuring unit can be changed between English and Metric.
Press the
1.
USER ZON
E key.
When the
2.
“USER SETUP"
message comes on in the message display; press either the
UP
or
DOWN
key until the message
“UNIT SETUP”
comes up.
Press the
3.
ENTER
Key. At this time the message display will display either
“ENGLISH”
or
“METRIC”
depending on the settings of the console.
Press either
4.
UP
or
DOWN
key to select the preferred measuring units.
Press the
5.
ENTER
key. The measuring units will be changed and the console will reset to Idle
Mode.
Sound Setting
F.
The beeper on this units can be turned off and back on.
Press the
1.
USER ZONE
key.
When the
2.
“USER SETUP”
message comes on in the message display; press either
UP
or
DOWN
key until the message
“SOUND SETUP”
comes up.
Press the
3.
ENTER
Key. At this time the message display will display either
“SOUND ON”
or
“SOUND OFF”
depending on the settings of the console.
Press either
4.
UP
or
DOWN
key to select the preference.
Press the
5.
ENTER
key. The console will stop or start beeping and reset to Idle mode.
1000Sr OM.indd 19
1000Sr OM.indd 19
7/7/2008 2:28:08 PM
7/7/2008 2:28:08 PM
Summary of Contents for 1000SR
Page 5: ...6 Assebly Drawing 1000Sr OM indd 6 1000Sr OM indd 6 7 7 2008 2 27 54 PM 7 7 2008 2 27 54 PM ...
Page 37: ...38 Notes 1000Sr OM indd 38 1000Sr OM indd 38 7 7 2008 2 28 11 PM 7 7 2008 2 28 11 PM ...
Page 38: ...39 Notes 1000Sr OM indd 39 1000Sr OM indd 39 7 7 2008 2 28 11 PM 7 7 2008 2 28 11 PM ...
