18
Console Layout (Continued)
Press the
1.
USER ZONE
key.
The message
2.
“SELECT FUNCTION”
will be fl ashed in the message display then the message
“USER SETUP”
will come up next. Press the
ENTER
key when the User Setup message is in
the message display.
The message
3.
“USER 1”
will come up. Press the
ENTER
key.
Note: If a user was created already the user’s name will come up instead. Use the
UP
or
DOWN
keys to fi nd an open space.
The message
4.
“CREATE NEW USER”
will then be displayed. Press the
ENTER
key.
Note: If there has been a user already created there will be four function that you can select from
using the
UP
or
DOWN
keys.
When the message
5.
“DELETE USER = YES”
comes on, press the
ENTER
key. By pressing
the enter key you will deleted the information that was saved under the name you selected. If
by mistake you selected a profi le that you don’t want to delete press the
UP
or
DOWN
keys to
change the yes to no and press enter.
Enter your name, using up to eight characters. Use the
6.
UP
or
DOWN
keys to toggle trough the
alphabet on each space. On each space once you fi nd the letter you need press the
ENTER
key. If your name is less than eight characters long just press the
ENTER
key on the rest of the
spaces to leave them blank.
Enter your age. The message display will display
7.
“AGE = XX”
press the
UP
or
DOWN
keys to
change the number to your age.
Enter your weight. The message display will display
8.
“WEIGHT = XX”
press the
UP
or
DOWN
keys to change the number to your weight.
Enter your Warm Up and Cold Down time. The message display will display
9.
“WU/CD = 3 MIN”
press the
UP
or
DOWN
keys to change the number from 1 to 5 minutes.
Enter your Target HR. The message display will display
10.
“TARGET HR = XX PCT”
press the
UP
or
DOWN
keys to change the number FROM 60% to 85%.
The message
11.
“SET UP COMPLETED”
will be displayed. The console will reset to idle mode
and all of the information entered will be saved.
Edit Profi le
B.
Once a profi le is saved any of the information can be edited.
Press the
1.
USER ZONE
key.
Press the
2.
ENTER
key when the
“USER SETUP”
message comes on in the message display.
Using either the
3.
UP
or
DOWN
keys fi nd your profi le and press the
ENTER
key.
Press either the
4.
UP
or
DOWN
keys until the message
“EDIT USER”
comes up.
Press the
5.
ENTER
key.
At this time the console will allow you to edit your age, weight, warm up and Cool Down time and
6.
target HR. The data can be changed the same way it was done when creating the user profi le
the fi rst time. The console will prompt you the fi rst data you can edit. If you don’t wish to edit
some of the data, just press the enter key when the data comes up.
After you edit your Target HR the message
7.
“SET UP COMPLETED”
will come up, the data you
edited will be saved and the console will reset to Idle mode.
Review Totals
C.
If a user profi le is selected when working out; the console will save and accumulated the workout time,
the distance and the total calories and add it to the data totals for that user then the information can be
reviewed at any time.
1000Sr OM.indd 18
1000Sr OM.indd 18
7/7/2008 2:28:07 PM
7/7/2008 2:28:07 PM
Summary of Contents for 1000SR
Page 5: ...6 Assebly Drawing 1000Sr OM indd 6 1000Sr OM indd 6 7 7 2008 2 27 54 PM 7 7 2008 2 27 54 PM ...
Page 37: ...38 Notes 1000Sr OM indd 38 1000Sr OM indd 38 7 7 2008 2 28 11 PM 7 7 2008 2 28 11 PM ...
Page 38: ...39 Notes 1000Sr OM indd 39 1000Sr OM indd 39 7 7 2008 2 28 11 PM 7 7 2008 2 28 11 PM ...
