HAND MIXER MX11
GB
17
l
Never let other persons, especially
children. touch the machine or cables.
l
Switch the machine of when other
persons, especially children, are in the
immediate vicinity of your working
area.
l
The operator is responsible for
accidents and risks threatening other
persons or their property.
l
Children, persons younger than16
years and persons that have not read
this manual are not allowed to operate
this machine.
l
Never leave this machine unattended.
l
Only operate the machine with
complete and correctly attached safety
equipment and do not alter anything
that could impair the safety.
l
Do not alter the machine or parts of the
machine.
l
Switch the machine OFF and
take the plug out before
carrying out:
− repair work
− maintenance- and
cleaning work
− eliminating faults
− checking tangled or damaged
cables
− transport
− unusual sounds or vibrations
l
Maintain your machine with care:
− make sure the ventilation openings
are clean.
− make sure the grips are free of
grease and oil.
l
Check the machine for possible
damage
− Before use check all safety devices.
Make sure they are installed correctly
and function properly.
− Check the machine for damaged
parts. All parts must be mounted
correctly to ensure proper functioning
of the machine.
− Damaged protective devices and
parts should be repaired or replaced
by an authorized serice center.
− Damaged or illegible safety stickers
should be replaced.
l
Store your machine in a dry, locked
space out of reach of children.
ELECTRICAL SAFETY
l
The cable should comply with IEC
60245 (H 07 RN-F) and should have
a diameter of at least:
3 x 1,5 mm² for lengths up to 25 m.
3 x 2,5 mm² for lengths over 25 m.
l
The use of long or too thin cables will
result in a loss of power. The
performance of the motor will be
reduced.
l
Plugs and sockets should be made out
of rubber, PVC or another thermoplastic
material with the same density or be
coated with such a material.
l
Electrical connections should be splash
water proof.
l
Prevent cables and extension cords
from getting tangled, stuck or bent and
make sure connections do not get wet.
l
Completely unwind cable drums.
l
Check extension cords for damage
regularly and replace when
neccessary.
l
Do not use damaged cables.
