manualshive.com logo in svg

Diamond OLP-82P, Cleaning Procedures, Page: 17 / 23

Share
Download
Diamond OLP-82P Cleaning Procedures Download Page 17

Dia-Clean Digital Video Microscope - e

16

10.   CLEANING THE MATING ADAPTER SLEEVE

1.  Connectors must be unplugged from the mating adapter before cleaning.

2.  Clean the mating sleeve by pushing the nylon brush back and forth through the sleeve several times and 

follow with a blast from the miniature bellows or the compressed air canister.

3.  Cleaning of E-2000™/F3000™ mating adapters.
 

Introduce 2 E-2000™/F3000™  blank-bodies into the mating adapters, so that the way to  

 

alignment sleeve becomes free. Clean the adapter by using the correct cleaning stick, 1.25/2.5mm  

 

and  by following upper description from 1 to 5. Remove the blank-bodies after cleaning.

4.  Clean the outer parts of the mating adapter with a lint-free wipe.
5.  Keep the protective caps mounted when not in use.
6.  Damaged mating adapters should be replaced.

10

VISUAL INSPECTION SAMPLES OF THE FIBRE

No.

Denomination

P.N

1

F-3000 body for cleaning

1066909

2

E-2000 body for cleaning

1031687

3

Cletop cleaning sticks L=150mm ø1.25 - 5pz

1020857

4

Cletop cleaning sticks L=150mm ø2.5  - 5pz

1065369

4

2

1

3

Summary of Contents for OLP-82P
























Reviews:

No comments