Epsilon-8130 User Manual Revision 1.0 PRELIMINARY
Page 39
26. Load the f ile
Epsilon-8100.gz
.
load -r -b 0x80040000 -m xmodem
27. From TeraTerm, choose File > Transf er > XMODEM > Send..., select
Epsilon-8100.gz
, and click Open.
28. Create the managed and managed.bk f ile entries.
fis create -r 0x80040000 -e 0x800400bc -l 0x600000 -f 0x401c0000 managed
fis create -r 0x80040000 -e 0x800400bc -l 0x600000 -f 0x407c0000 managed.bk
Note: File names managed and managed.bk must not be changed. The upgrade f unction of the
application relies on these names.
Create a boot script
29. Start a new script.
fconfig -i
30. Press y when prompted to continue. This will show "Run script at boot: f alse" selection.
31. Change
‘
false
’ to ‘
true
’ for the selection "Run script at boot: false" and Hit <Enter> Key
32. Enter the f ollowing commands
fis load -d managed
go
fis load -d managed.bk
go
33. Hit <Enter> Key. This will show " Boot script timeout (1000ms resolution): 0" selection.
34. Change
‘0’
to
‘3’
f or the selection "Boot script timeout (1000ms resolution): 0".
35. If the application sof tware version is 2.0.0 or above , Set the baud rate to
38400
in the selection “Console
baud rate:
38400
”. else use
115200
.
36. Press
y
to when prompted to continue.
37. Reset the device with the f ollowing command.
reset