Epsilon-8130 User Manual Revision 1.0 PRELIMINARY
Page 22
7.5.22 Firmware Commands
# f irmware swap
# f irmware upgrade <tf tpserver_path_f ile>
7.5.23 Ping Commands
# ping ip <v_ip_addr> [ repeat <count> ] [ size <size> ] [ interval <sec onds> ]
7.5.24 Debug Commands
(conf ig)# no debug prompt
(conf ig)# line { <0~16> | console 0 | vty <0~15> }
# no debug prompt
# debug prompt <debug_prompt>
7.5.25 Security Commands
(conf ig)# no aaa authentication login { console | telnet | ssh | http }
(conf ig)# password encrypted <encry_password>
(conf ig)# password none
(conf ig)# password unencrypted <password>
(conf ig)# enable password [ level <priv> ] <password>
(conf ig)# enable secret { 0 | 5 } [ level <priv> ] <password>
(conf ig)# no enable password [ level <priv> ]
(conf ig)# no enable secret { [ 0 | 5 ] } [ level <priv> ]
# show aaa
# show port-security port [ interf ace ( <port_type> [ <v_port_type_list> ] ) ]
# show port-security switch [ interf ace ( <port_type> [ <v_port_type_list> ] ) ]
(conf ig)# aaa authentication login { console | telnet | ssh | http } { { local | radius | tacacs } [ { local | radius | tacacs
} [ { local | radius | tacacs } ] ] }
7.5.26 Monitor
(conf ig)# monitor destination interf ace <port_type> <in_port_type>
(conf ig)# monitor source { { interf ace ( <port_type> [ <v_port_type_list> ] ) } | { cpu [<cpu_switch_range> ] } } {
both | rx | tx }
(conf ig)# no monitor destination
(conf ig)# no monitor source { { interf ace ( <port_type> [ <v_port_type_list> ] ) } | { cpu [ <cpu_switch_range> ] } }