Diamond Systems EPSILON 8130 Series, User Manual, Page: 29 / 40

Epsilon-8130 User Manual Revision 1.0 PRELIMINARY
www.diamondsystems.com
Page 29
8.1.4 Set-up VLANs
The f ollowing example shows the conf iguration of a VLAN:
1. Connect to the web interf ace of EPS-8130 switch
2. Navigate to Conf iguration -> VLANS
a. In the allowed access VLANs enter number of LANs to be created. In this example 1-3, that creates
VLAN2 and VLAN3
b. By def ault mode is access, it can be changed to trunk or hybrid by changing Mode drop down list
c. Assign a ports to the virtual LANs by changing the values in the Port VLAN column (ref er to f igure
below)
d. Click on Save to save the VLAN conf iguration
e. To save VLAN settings permanently navigate to Maintenance -> Conf iguration -> Save startup-
conf ig click on save startup conf iguration
Figure 6
– VLAN Configuration
Af ter saving the VLAN conf iguration, VLAN membership status can be verif ied as f ollows:
1. Navigate to Monitor -> VLANs -> Membership (ref er to f igure below)
2. Ports 1 & 4 to 8 assigned to VLAN ID 1, Port 2 is assigned to VLAN ID 2 and Port 4 is assigned to VLAN
ID 3
Figure 7
– VLAN Membership Status for Combined users