background image

 

 

UM-B-093 

 

DA1469x PRO Development Kit 

  

User Manual 

Revision 1.1 

19-Feb-2019 

CFR0012 

22 of 22 

© 2019 Dialog Semiconductor 

Status Definitions 

Status 

Definition 

DRAFT 

The content of this document is under review and subject to formal approval, which may result in modifications or 
additions.  

APPROVED 
or unmarked 

The content of this document has been approved for publication.  

Disclaimer 

Information in this document is believed to be accurate and reliable. However, Dialog Semiconductor does not give any representations or 
warranties, expressed or implied, as to the accuracy or completeness of such information. Dialog Semiconductor furthermore takes no 
responsibility whatsoever for the content in this document if provided by any information source outside of Dialog Semiconductor. 

Dialog Semiconductor reserves the right to change without notice the information published in this document, including without limitation the 
specification and the design of the related semiconductor products, software and applications.  

Applications, software, and semiconductor products described in this document are for illustrative purposes only. Dialog Semiconductor makes 
no representation or warranty that such applications, software and semiconductor products will be suitable for the specified use without further 
testing or modification. Unless otherwise agreed in writing, such testing or modification is the sole responsibility of the customer and Dialog 
Semiconductor excludes all liability in this respect.  

Customer notes that nothing in this document may be construed as a license for customer to use the Dialog Semiconductor products, software 
and applications referred to in this document. Such license must be separately sought by customer with Dialog Semiconductor. 

All use of Dialog Semiconductor products, software and applications referred to in this document are subject to Dialog Semico

nductor’s 

Standard 

Terms and Conditions of Sale,

 available on the company website (

www.dialog-semiconductor.com

) unless otherwise stated.  

Dialog and the Dialog logo are trademarks of Dialog Semiconductor plc or its subsidiaries. All other product or service names are the property of 
their respective owners.  

© 2019 Dialog Semiconductor. All rights reserved.  

 

Contacting Dialog Semiconductor 

United Kingdom (Headquarters) 

Dialog Semiconductor (UK) LTD 

Phone: +44 1793 757700 

Germany 

Dialog Semiconductor GmbH 

Phone: +49 7021 805-0 

The Netherlands 

Dialog Semiconductor B.V. 

Phone: +31 73 640 8822 

North America 

Dialog Semiconductor Inc. 

Phone: +1 408 845 8500 

Japan 

Dialog Semiconductor K. K. 

Phone:  +81 3 5769 5100 

Taiwan 

Dialog Semiconductor Taiwan 

Phone: +886 281 786 222 

Hong Kong 

Dialog Semiconductor Hong Kong 

Phone: +852 2607 4271 

Korea 

Dialog Semiconductor Korea 

Phone: +82 2 3469 8200 

 

China (Shenzhen) 

Dialog Semiconductor China 

Phone: +86 755 2981 3669 

China (Shanghai) 

Dialog Semiconductor China 

Phone: +86 21 5424 9058 

 

Email:  

[email protected] 

Web site:  

www.dialog-semiconductor.com 

 

 

Summary of Contents for DA1469 PRO series























Reviews: