Document No.
9100-127-1109-99 Rev A
Release Date: Sept 11, 2007
_____________________________________________________________________
_____________________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax:732.751.5778 Web: www.dialight.com
Sheet 8 of 14
Switch Settings
The microcontroller board has a switch block allowing a number of options to be
set up as follows:
1 2 3 4
ON
ON
OFF
1
White
at
night
Red
at
night
2
WRED pattern for red
50% duty cycle for red
3
Relays pulse while OK
Relays static
4
Relays open on fault
Relays close on fault
Note:
1: For both the Red Beacon and White Strobe a fault is indicated after 20
consecutive faulty flashes.
2: When the fault relays are in pulse mode and their respective light is OK, they
pulse at 0.5 seconds off and 0.5 seconds on.
Power Supply to Light Engine Cable
The connection between the power supply and light engine is made by means of
a shielded multi-way connection cable.
