Revised 9/25/2018
PFMTF50 Instruction
CHARGING BATTERY
WARNING:
Never attempt to charge standard (non-rechargeable) batteries. Doing so
could result in injury and will void the warranty.
This unit operates on one rechargeable 14500 Li-Ion battery (
included
) and we
recommend fully charging it first. To do so, insert the battery into the home charger
following the polarity diagram shown on the charger. Flip out the charging plug on the back
of the charger and plug it into a standard wall outlet.
IMPORTANT: Do not charge for
longer than 3 hours or continue to charge once the light on the charger turns green.
Once the light on the charger changes from red to green, the battery is fully charged and
should be removed from the charger.
NOTE: PFMTF50 can use a standard AA battery (not included); however, the unit’s
performance will be limited to 1-2 hours. We highly recommend that you always use the
included 14500 Li-Ion battery.
INSTALLING THE BATTERY
1.
To access the battery compartment, unscrew the end cap (at the opposite end of the
light) by turning it counterclockwise.
Slide Zoom
Included 14500 Li-Ion Battery
Unscrew end cap
to insert battery
Push button tail switch
(
Not shown
)
Belt clip
Battery Charger
with flip plug
