Thermal Jet
Section 1: Safety and Ink Cartridge Usage
5780-320 Operations Manual Rev C
Page 1
Section 1: Safety and Ink Cartridge Usage
Following is a list of safety symbols and their meanings, which are found throughout this
manual. Pay attention to these symbols where they appear in the manual.
Wear safety goggles when performing the procedure described!
Caution or Warning! Denotes possible personal injury and/or damage to the equipment.
Caution or Warning! Denotes possible personal injury and/or equipment damage due to
electrical hazard.
NOTE:
(Will be followed by a brief comment or explanation.)
ESD protection should be worn when servicing internal printed circuit boards.
After service to the equipment is completed, replace all protective devices such as ground-
ing cables and covers before operating the equipment.
It is extremely important to:
•
Clean up all spills with the appropriate solvents immediately and dispose of all waste according
to local and state regulations.
•
Wear safety glasses and protective clothing, including gloves, when handling all inks and condi-
tioners.
•
Store inks and solvents under the recommended conditions found on the MSDS (Material
Safety Data Sheet).
Ink Cartridge:
The TJ500 has been engineered and designed to work with Diagraph ink
cartridges. The TJ500’s
Smart Level Ink Detection System
, which provides ink level
monitoring to ensure complete ink usage and product safety, will not be functional if used
with non-Diagraph ink cartridges.
!
!
