Thermal Jet
Appendix D: File Backup and Restore
5780-320 Operations Manual Rev C
Page 33
Appendix D: File Backup and Restore
Use these procedures for making archival copies of the system configuration and print
message files, and for preserving the system's configuration and print messages during
firmware upgrades. File types saved during a backup are .cfg, .prd, .bmp and .alp. These
are the system configuration files, message files, logo files and label files, respectively.
These instructions assume the IJ3000-ES Controller is already connected, via Ethernet, to
a PC. If not, please refer to
“Appendix E: Configuring a PC to Communicate with the
1. Obtain the IJ3000-ES Controller's IP address. Most IJ3000-ES controllers have an IP
address of
10.1.2.3
. It may be different if the controller is networked with other IJ3000-
ES’s or other devices. If the IP address is unknown, go to the controller, and from the
Home Screen
:
•
Touch the
Control Panels
button to open the Control Panels Menu.
•
Touch the
Network
button on the Control Panels Menu to open the Network Setup
Screen.
•
Touch the
IP Addresses
tab to display the system's IP addresses.
•
Record the IJ3000-ES's IP address (it's the top one).
2. On the PC, start Microsoft Internet Explorer (must be version 3.2 or higher) or another
web browser.
3. In the browser's address box type in "http://", followed by the controller's IP address.
See the illustration below:
4. Press
Enter
. The web page shown below should appear.
