Diagraph I.V./700, Service Manual

Page: 48 / 50

5750-212
Revision A
Page 48
I.V./700 External Photosensor 5750-183N
These instructions cover the configuration
of the I.V./700 ink jet printer with the
external photosensor.
Contents
External Photosensor [1] and bracket [2]
5750-113
Photosensor/Controller Cable [3]
5750-182
Instruction Sheet
5750-183N
Configuration
See the diagram on page 2 for the
configuration command sequence.
Note dimension "X" in the illustration at
right--the distance from the center of the
photosensor to the center of the printhead.
When mounting the photosensor, make
sure that the X dimension is less than the
gap between the products as they move by
on the conveyor. If X is greater than the
gap between products, some products will
missed when the I.V./700 is printing.
Measure X and use it to set Message
Indent in the controller. With an external
photosensor, the indent distance is the sum