DSP-10 User Manual
Page 11 of 26
DSP10_MAN_C
Figure 5: Outputs with Extension
Figure 6: Outputs with Delay and Extension
Sensitivity Boost (DIP Switch 4)
The detector has a user selectable feature that increases the sensitivity of a channel after initial detection. This
feature is most often used to allow a detector to have a lower starting sensitivity and then increase it after a
vehicle has been detected. This is useful in situations where high-bed tractor-trailer vehicles will be passing over
the loop. With this feature the detector may be able to detect the high-bed portion of the vehicle without
having to be overly sensitive and susceptible to false detections. NOTE: If detection of high-bed tractor-trailers
is required, correctly sized loops must be used.
