DSP-10 User Manual
Page 10 of 26
DSP10_MAN_C
Pulse on Exit:
Every time the loop becomes vacant or a vehicle is tuned out, a single 250 milliseconds pulse will
be output on the B output.
Fail:
If the DSP-10 recognizes some type of loop failure, a continuous output on the B output will be given. The B
output will remain activated until the failure is corrected.
The following figures show the effects of delay and extension on the A & B outputs. The numbers between
edges are the number of seconds in that period.
Figure 3: Outputs with No Delay or Extension
Figure 4: Outputs with Delay
