Pag. 38 of 52
11.71 M71 - LCD contrast programming
In this menu it’s possible to set the LCD contrast.
Range: 00÷31 Press
to enter, then increase the contrast with the
or
decrease the contrast with
.
Press
to store
- Programming menu
11.71 M72 - Operation time displaying
In this menu it’s possible to display the
DIMPU
operation total time,
since the last timer reset.To reset the timer, proceed as follows:
Press
2 times to enter, then select “
YES
” with
and press
to
confirm the reset.
11.73 M73 - #1 Q min. alarm programming
In this menu it’s possible to set the minimum flow threshold for the #1 alarm.
11.74 M74 - #1 Q max. alarm programming
In this menu it’s possible to set the maximum flow threshold for the #1 alarm.
11.75 M75 - #2 Q min. alarm programming
In this menu it’s possible to set the minimum flow threshold for the #2 alarm.
11.76 M76 - #2 Q max. alarm programming
In this menu it’s possible to set the maximum flow threshold for the #2 alarm.
11.77 M77 - Buzzer operation programming
In this menu it’s possible to set the
DIMPU
unit acoustic signal function.
Available settings:
0. No Signal
1. Poor Signal
2. Not Ready (No *R)
3. Reverse Flow
4. AO Over 100%
5. Fo Over 120%
6. Alarm #1
7. Reverse Alarm #2
8. Batch Controller
9. POS Int Pulse
10. NEG Int Pulse
11. NET Int Pulse
12. Energy POS Pulse
13. Energy NEG Pulse
14. Energy NET Pulse
15. MediaVel=>Thresh
16. MediaVelo<Thresh
17. ON/OFF via RS845
18. Timer (M51 Daily)
19. Timed Alarm #1
20. Timed Alarm #2
21. Batch Total Full
22. Timer by M51
23. Batch 90% Full
24. Key Stroking ON
25. Disable BEEPER
