Pag. 35 of 52
- Programming menu
12
Energy NEG Totalizer
16
Analog Input 3
20
Flow Today
13
Fluid Velocity
17
Analog Input 4
21
Serial Number
14
RTD T1
18
Analog Input 5
15
RTD T2
19
Working Timer
11.51 M51 - Data logger timer programming
In this menu it’s possible set the timer data logger timer.
To set the timer, proceed as follows :
press
Set the data logger start time. Change the digit with
and move the cursor
to the right with
.
Press
to store the
start time
.
Set the data logger interval time between a recording and the other.
Change the digit with
and move the cursor to the right with
.
Press
to store the data logger interval time.
Set the data logger recordings number to be made.
Change the digit with
and move the cursor to the right with
.
Press
to store the storage number.
Set the timer,
M51
will display the next data recording time and
the data recording number still to be made
11.52 M52 - Data transmission programming
In this menu it’s possible to set the data transmission mode.
Default mode: 1. INVIA CON RS-485
Available settings:
1. Send To RS-485
2. Internal SerBus (not yet available)
11.53 M53 - AL5 analog input displaying
In this menu it’s possible to display the AL5 analog input.
11.54
M54 - OCT output pulse width programming
In this menu it’s possible to set the OCT output pulse width.
Range: 1÷500mS
