JINDLE04 Rev B 15/09/15
R
EMOVING INTERNAL
COMPONENTS
1.
To open the stove door, pull on the door lever to
release it from the magnet. Swing the handle out
to the right until the mechanism engages and the
door catch is released.
N.B. When closing the door keep the door handle
out to the right until the door is closed.
N.B. from this point forward, the door has been
hidden for illustrative purposes.
2.
Remove the log retainer by lifting it clear of the
two support pins.
3.
Remove the baffle brick by lifting it up, sliding it
to the right and then lowering the left hand edge
into the firebox.
4.
Remove the two side bricks by lifting them up
to release them from the slots in the base brick.
Swing the bricks into the centre and remove
them from the stove.
5.
Remove the three rear brick sections noting their
positions and orientation.
6.
Lift up and remove the base brick.=
Table 2
- Flue terminal positions