Di-LOG CombiVolt 5, Instruction Manual

Page: 5 / 38

DL6799 OPERATING MANUAL
2
Ill. Safety Notices
This instrument is to be used only by trained
and competent persons.
The instrument is designed and produced in strict
accordance with the safety requirements for Electronic
Measuring Apparatus and EN61010-1, EN61010-2-032,
EN61010-2-033, EN61010-031, EN61326-1 and
EN61326-2-2 standards, and complies with the safety
standard of double insulation, over-voltage CATII
1000V, CAT III 600V and pollution level 2. If you fail
to use the instrument according to relevant operation
instructions, the protection provided by the CombiVolt 5
instrument is likely to be weakened or undermined.
CAT II: Applicable to test and measuring circuits
connected directly to live voltage (socket outlets or
similar points) of the low voltage mains installation.
CAT Ill: Applicable to test and measuring circuits
connected to the distribution part of the building's
low-voltage MAINS installation.
1.
Prior to using, please check the CombiVolt 5 and
integrated test lead & probe set for any damage or
abnormality. If any of the probes insulating layer or
lead are obviously damaged, the display screen fails
to display or you consider there is a fault with the
instrument, please do not use and contact Di-log for
further assistance.
Di-LOG
...measurably better