Di-LOG CombiVolt 5, Instruction Manual

Page: 32 / 38

DL6799 OPERATING MANUAL
9. Non-contact Voltage Indication (NCV)
(1) Set the rotary dial to “
NCV
“;
(2) Connect the instrument to the conductor to be
checked. The top right end of the clamp head is
equipped with a sensor.
The screen will display “EF” if the induced voltage
is not detected. When the test distance is less than
10cm and the tested voltage is greater that 100Vrms
the instrument will emit an audible alarm the NCV
LED light will also start to flicker. According to the
magnitude of voltage present, the display screen will
display four levels as “-”, “- -”, “- - -” or “- - - -”. The
greater the voltage, the higher the level displayed.
Warning:
This unit can only be used as a single pole voltage
detector when batteries are inserted. The single
pole test is intended only as a quick check, the circuit
must be checked again for the presence of voltage
using the AC voltage setting and 2 pole method.
29
Di-LOG
...measurably better