15
EXERCISE MONITOR
SPECIFICATIONS:
TIME---------------------------------------------------------------------------------- 00:00~99:59MIN
SPEED-------------------------------------------------------------------------------0.0~99.9KM/H(ML/H)
DISTANCE--------------------------------------------------------------------------0.00~999.9KM(ML)
ODOMETER------------------------------------------------------------------------0.0~9999KM or ML
PULSE ----------------------------------------------------------------------------40~240BPM
CALORIE----------------------------------------------------------------------------0.0~9999KCALs
KEY FUNCTIOINS:
MODE:
This key lets you to select and lock on to a particular function you want.
OPERATION PROCEDURES:
5. AUTO ON/OFF
◆
This system turns on when any key is pressed or when it receives an signal input from the speed
sensor.
◆
The system turns off automatically when the sensor has no signal input of no key are pressed for
approximately 4 minutes.
6. RESET:
The unit can be reset by either changing battery or pressing the mode key for 3 seconds.
7.
MODE:
To choose SCAN or LOCK if you do not want the scan mode, press the MODE key when the pointer on
the function you want which begins blinking.
8. FUNCTIONS:
7.
TIME:
Press the MODE key until pointer lock on to TIME. The total working time will be shown when
starting exercise.
8.
SPEED:
Press the MODE key until pointer lock on to SPEED. Displays current speed during workout time.
9.
DISTANCE:
Press the MODE key until pointer lock on to DISTANCE. The distance of each workout will
be displayed when starting exercise.
10.
ODOMETER:
Press the MODE key until the pointer advances to ODO METER. The total accumulated
distance will be shown.
11.
CALORIE:
Press the MODE key until pointer lock on to CALORIE. The calorie burned will be displayed
when starting exercise.
12.
PULSE :
Press the MODE key until the pointer advance to PULSE function and put ear-clip to ear or the
hand take hold of the sensor about 3 seconds show out.
SCAN:
Display changes according to the next diagram every 4 seconds. Automatically display of the following
functions in the order shown:
TIME-SPEED-DISTANCE CALORIE-PULSE
NOTE:
5. Without any signal coming in 4-5 minutes, the LCD display will be shut off automatically.
6. When there is signal input, the monitor automatically turns on.
7. If there is a possibility to see an improper display on the monitor, please replace the batteries to have a
good result. You must be to replace the batteries at the same time.
The monitor use 1.5V
“AA” or “AAA” batteries.
