12
ASSEMBLY INSTRUCTION:
1. PREPARATION:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above of this instruction
sheet you will find an explosion drawing with all single parts (marked with numbers) which this item
consists of.
2. ASSEMBLY INSTRUCTION:
6R
6L
7
5
4
3
3
8
2
3
4
5
11
13
14
15
16
11
FIG.1
FIG.1:
Attach the Front Stabilizer(8) and the Rear
Stabilizer(2) to the Main Frame(11) with
Carriage Bolt (3), Domed Nut (4) and Arc
Washer(5).
The Pedals (6L &6R) are marked "L" and
"R" - Left and Right.
Connect them to their appropriate crank
arms. The right crank arm is on the right-
hand side of the cycle as you sit on it.
Note that the Right pedal should be
threaded on clockwise and the Left pedal
anticlockwise.
FIG.2:
Remove the bolts from the seat (16), then
tighten seat(16) to seat post(13) with the
flat washer(15) and nylon nut(14). Insert
the seat Post(13) into the main frame(11)
and line up the holes.Secure the seat in
position with the Adjustment knob(10).
The correct height for the seat can be
adjusted
after
the
bike
is
fully
assembled.
FIG.2
