9
IMPORTANT NOTE: The left Hinge Bolt L (No. 45) contains reverse threading. When assembling
the left side, Hinge Bolt L (No. 45) must be turned counter-clockwise to tighten.
ALTERNATE INSTALLATION METHOD:
STEP 1:
Disconnect
the
Link
Connector
Combination
(No.
47)
from
the
Connecting Rod (No. 55).
STEP 2:
Insert Hinge Bolt L (No. 45) and Hinge
Bolt R (No. 40) through the Wave
Washers (No. 70), then through the hole
of the Link Connector Combination (No.
47), then screw the Hinge Bolt into the
crank arm. (Remember when assembling
the left side, you must screw counter-
clockwise to tighten). Connect the Spring
Washers (No. 49), Nylon Nut L (No. 50)
and Nylon Nut R (No. 48) and attach the Ball Caps (No. 61). You can now reattach the Link
Connector Combination (No. 47) to the Connecting Rod (No. 55).
IMPORTANT:
The Left & Right Hinge Bolts (No. 45 and No. 40) must
fully penetrate the Link Connector Combination (No.
47) and crank. This will ensure the stability and
durability of your Elliptical Trainer.
To install the hinge bolt properly, keep it perfectly
straight as the bolt passes through the pedal arms and
the crankshaft. If the hinge bolt is connected to the
crankshaft at an angle, damage to both the hinge and
crankshaft may occur.
Summary of Contents for 3435E
Page 6: ...5 Piese si unelte...
Page 24: ...5 Assembly Tools...
