DHS Fitness 3435E, User Manual

Page: 27 / 33

8
STEP 3:
¦ µ
¦ µ
Attach Swing Rods (No. 25L & No. 25R) to the Handlebar Post (No. 64) using 2 Bolts (No. 24), 2
Spring Washers (No. 23) and 2 Washers (No. 22), tighten and secure with Spanner (No. 68).
Cover both swing rod ends using 6 Ball Caps (No. 60).
Attach Link Connector Combination (No. 47) to the left crank arm of the Main Frame (No. 59)
using Hinge Bolt L (No. 45), 1 Wave Washer (No. 70), 1 Spring Washer (No. 49) and Nylon Nut L
(No. 50). Tighten and secure with Allen Wrench S8 (No. 66) and Spanner (No. 69). Repeat this
process to complete the assembly on the (right side).
Cover Nylon Nut L & Nylon Nut R (No. 45 & No. 40) using 2 Ball Caps (No. 61). Cover nut on
lower end of Connector (No. 55) (both sides), using 2 Ball Caps (No. 62).
IMPORTANT:
Swing Rods
25L & 25R (Left
& Right) are
marked with
L
and R when
installing the
stickers must
face the frame