7
DHOLLANDIA
[OAP822.1]
→
Platform in perforated aluminum plate with non-slip buds.
3a
Platform main section: inboard section of the foldable platform [3] connected to the ramp frame [1].
3b
Foldable point: foldable, outboard section of the platform [3] resting on the ground during use.
3c
Flip-over point [DH-AI13]: on DH-AI13 ramps with 3 platform sections, the foldable point [3b] is replaced by a foldable
middle section supported by support feet [7] and a flip-over point [3c] resting on the ground during use.
4
Door protection rubber: absorbs small movements and/or vibration caused by the motion of the vehicle.
5
Automatic lock: keeps the 2 (or 3) parts of the platform together in travel position.
6
Fixation pin [OAF820.L]: gives the operator the possibility to lock the platform [3] in a 90° outward or inward position.
7
Support feet:
DH-AI13
→
height-adjustable feet supporting the flip-over point and middle section of the DH-AI13 [3b + 3c] while loading
and unloading.
DH-AI12.10
→
height adjustable feet proving additional support while loading and unloading heavy loads.
8
Rollers [DH-AI12]: rollers mounted at the outboard edge of the flip-over point [3b], helping the operator to unfold and fold
the ramp.
9
Handles: mounted at the side edges of the platform [3], used to grab the platform while unfolding and folding the ramp.
The use of the handles is mandatory! They prevent that the operator can crush his / her fingers or hands between the
folding platform sections.
10
Turn s bar [OAF820.L]: holds the platform during the pivoting motion.
11
Middle gas cylinder: standard on DH-AI13, optional [OAP825] on DH-AI12 to induce a fully automatic deployment in case
of emergency.
12
Platform lock: mechanical lock at the side of the platform.
[DH-AI13]
locking the flip-over point [3c] in travel position.
[DH-AI02]
keeps the platform main section and the foldable point together.
13
Support rubber: rubber buffers on which the platform rests in travel position, absorbing vibrations and mechanical driving
noises [DH-AI12 / AI13].
On demountable ramps DH-AI01 / AI02, support rubbers are used as feet to rest the ramp frame on the vehicle floor.
14
Side supports [DH-AI01 / AI02]: protect the ramp when placed on its side.
DH-AI fixed frame ● TERMINOLOGY
