31
DHOLLANDIA
8.5
OPERATION OF THE PORTABLE RAMP DH-AI01.04
Position the ramp vertically with the 2 handles
facing upwards. The opposite side of the
platform is equipped with wear pads to avoid
scratches of the platform as much as
possible.
Flip the ramp over to its work position.
Place the ramp inside the vehicle and let it
rest on the rubbers or the fixation bolts.
Make sure and verify before each passage
that the ramp is properly rested on the vehicle
floor and cannot slide or fall out during
operation.
Make sure the ramp is fully aligned at both
ends: the inboard platform edge with the
vehicle floor and the outboard edge with the
ground. Make sure the 4 corners are in firm
contact with a hard surface (not floating).
