7
I F U
4. Using Bure Walker with Gait Training Kit 56-388
Top view
Front
Back
•
The gait support harness has four blue straps with a plastic buckle allowing for adjustments in length, having
steel carabiner clips at the ends to be fasten to the gait walker. The carabiner clips on to the metal mounts
placed under the table of the Gait walker.
•
Apply the gait walker support harness by clipping on the two front carabiners to the front mounters, one on
each side of the table.
•
Place the user standing up in the Gait walker. Pull back the harness in between the legs and clip on the
carabiners to the back mounters, one on each side of the table. Adjust the harness to the user by pulling in
the back strap loops.
•
Observe!
Intended use of the Gait trainer support harness is to practise walking.
It is not
a sitting or lifting aid
.
Standing Plate
Attach standing plate by hooks on the main frame of the walker
