2.5-Output power
Sequence: E +1 + 5
The display shows:
The digital control of the output power allow to modify it between 0 and the maximum value assigned for the
transmitter. If
"E"
is pressed without changing the output level value, it is returned to
P2
.
To modify the output power, press the “
↑↑↑↑↓↓↓↓
” keys until the desired value is reached. Once this one is
reached, press
"E"
.
When the minum or maximum values are ratched, the
“ERROR”
the alarm signal will be heard.
The display will shows:
Press
“1”
to store the new output power,
“2”
to exit without change the current output power and to return
to
P1
.
SECTION 9/8
FWD: 10 W
REF: 0 W
STORE PO: 10 W
1:YES 2:NO :
Summary of Contents for STAL1000
Page 10: ...SECTION 6...
