51
2. Installation and Setup
2. Connecting to the Computer
Step 5 : Determining the LAN Address
Important: Windows firewall function
During LAN communication, this machine uses TCP ports 9100, 9500, and 9501. If you are using the
Windows firewall function, set it so that these ports are not blocked.
Important: Network settings
The settings listed here are only an example. The procedure and settings given in this manual do
not match every environment. In an environment where the computer being used is connected
to multiple network devices and the Internet, inappropriate settings will have a large effect on the
entire network. For detailed information about the settings, consult your network administrator.
Determine the IP address, subnet mask, and default gateway to connect the computer and the machine via LAN.
Connecting the Computer and the Machine Directly
Computer
Machine side
Remarks
IP address
192.168.1.XXX 192.168.1.YYY
Ensure that these are unique numbers
compared to other network devices and
that "XXX" and "YYY" represent unique
numbers from 1 to 254.
Subnet mask
255.255.255.0
255.255.255.0
Set the computer and the machine to the
same number.
Default gateway 192.168.1.AAA 192.168.1.BBB
"AAA" and "BBB" represent unique
numbers from 1 to 254. This setting may
not be necessary. For details, check with
your network administrator.
Connecting to an Existing LAN Environment
For each setting value, check with your network administrator.
Computer
Machine side
IP address
Check with your network administrator. Check with your network administrator.
Subnet mask
Check with your network administrator. Check with your network administrator.
Default gateway Check with your network administrator. Check with your network administrator.
