To Ensure Safe Use
10
In the event of ingestion or physical distress
• In the event of contact with the eyes, immediately flush with water for at least 15 minutes. If eye irritation
continues, seek treatment by a physician.
• In the event of contact with skin, immediately wash with soap. If irritation or inflammation occurs, seek
treatment by a physician.
• In the event of ingestion, do not induce vomiting, and immediately seek treatment by a physician. Forcibly
inducing vomiting may lead to danger of choking.
• If odor leads to physical distress, move to a well-ventilated location and rest quietly. If dizziness or nausea
persists, seek treatment by a physician.
¾
Refer to the appropriate safety data sheet (SDS) for the chemical substances used in the grease and the
safety related to those substances.
¾
Refer to the appropriate safety data sheet (SDS) for the chemical substances used in the additives and the
safety related to those substances.
Important notes about the end (cut edge) of the air hose
Failure to observe these cautions may result in air leakage or easy dislodgement of the air hose.
Also, when a hose has been detached, cut off the end before reattaching the hose.
Ensure that it is not
crushed.
Make the cut edge
straight.
Keep free of damage
and soiling.
WARNING
Never drink or sniff the additives
or coolant or allow them to come in
contact with the eyes or skin.
Doing so may be hazardous to your health.
WARNING
After milling, wash away any products
with purified water or the like.
After milling, there will be coolant on the
product. Using the product as is may cause
an inflammation or the like.
Additives and coolant are toxic
