36
2. Installation and Setup
1. Installation
Step 2 : Removing the Retainers
Retainers are attached to protect the machine from vibration during shipment. When installation is complete,
remove and save these retainers.
• Be sure to remove the retainers. Any that remain may cause faulty operation or a breakdown when the
power is switched on.
• The retainers will be required when moving the machine to a different location. Store them carefully so that
they do not get misplaced.
• When removing the retainers, make sure the power cord is not connected.
Procedure
A
Open the front cover.
Hold this with
both hands.
B
Remove the retainers.
1
Pull the bottom of the retainer (large) toward you.
2
Slide the retainer with it facing up to remove it.
1
2
