DFI WM343-SD330 Page 65 User Manual Download

Page: 65 / 94

Chapter 7

Chapter 7 BIOS Setup

www.dfi.com

Note:

a. You can take advantage of flash tools to update the default configuration of the

BIOS (SPI ROM) to the latest version anytime.

b. When the BIOS IC needs to be replaced, you have to populate it properly onto the

system board after the EEPROM programmer has been burned and follow the

technical person's instructions to confirm that the MAC address should be burned

or not.

Notice: BIOS SPI ROM

1. The Intel

Management Engine has already been integrated into this system board. Due to

safety concerns, the BIOS (SPI ROM) chip cannot be removed from this system board and

used on another system board of the same model.

2. The BIOS (SPI ROM) on this system board must be the original equipment from the factory

and cannot be used to replace one which has been utilized on other system boards.

3. If you do not follow the methods above, the Intel

Management Engine will not be updated

and will cease to be effective.

Updating the BIOS

To update the BIOS, you will need an updated BIOS file and a flash utility. Please contact

technical support or your sales representative for the files and specific instructions on how to

update BIOS with the flash utility.

When you download the given BIOS file, you may find a BIOS flash utility attached with the

BIOS file. This is the utility for performing the BIOS update procedure. For your convenience,

we will also provide you with an auto-execution file in the BIOS file downloaded. This auto-

execution file will bring you directly to the flash utility menu soon after system boots up and

finishes running the boot files in your boot disk.

Read file successfully. (path= “platform.ini”)

Insyde H20FFT (Flash Firmware Tool) Version (SEG) 100.00.08.10

Initializing

Current BIOS Model name: SD330

New BIOS Model name: SD330

Current BIOS version: B17A.31A

New BIOS version: B18A.31A

Updating Block at FFFFF000h

0% 25% 50% 75% 100%

100%

C:\SD330>_

Information

Please do not remove the AC power

Summary of Contents for WM343-SD330































































































Search results

Summary of Contents for WM343-SD330

Reviews:

Related manuals for WM343-SD330

Brands by name

Popular brands

DFI WM343-SD330, User Manual

Search results

Summary of Contents for WM343-SD330

Reviews:

Related manuals for WM343-SD330

Brands by name

Popular brands