www.dfi.com
13
Chapter 3 Installing Devices
Chapter 3
Chapter 3 - Installing Devices
Opening the Chassis
Please observe the following guidelines and follow the procedure to open the system.
1. Make sure the system and all other peripheral devices connected to it have been powered off.
2. Disconnect all power cords and cables.
3. Remove the top cover by uninstalling the thumb screws.
Thumb screw
Installing a DIMM
To access the DIMM sockets, first remove the optical drive tray by uninstalling the screws from
the rear panel and inside the chassis.
Optical drive
tray screw
Optical drive tray screw