www.dfi.com
Chapter 1 Introduction
22
Installing WL968 onto a Carrier Board
Important:
The carrier board (COM332-B) and COM Express module used in this section are for
reference purpose only and may not resemble you carrier board and the acutal WL968
module. These illustrations are mainly to guide you on how to install WL968 onto the
carrier board of your choice.
COM Express connectors on the carrier board
2. Press WL968 down firmly to seat it in the COM Express connectors of the carrier board.
Note:
The illustration above shows the pressing points of the module onto the carrier board.
B
e careful when pressing the module to avoid damages to the connectors.
1. Grasp WL968 by its edges and position it on top of the carrier board with the mounting
holes of WL968 aligning with the standoffs on the carrier board. This will also align the
COM Express connectors of the two boards to each other.
Mounting standoffs on
the carrier board
COM Express connectors on WL968
Pressing points
Mounting holes of
WL968
Carrier board
WL968