60
3
Award BIOS Setup Utility
AC97 Audio
Auto
Select this option when using the onboard audio codec,
primary or secondary audio riser card, or audio/modem
riser card.
Disabled
Select this option when using a PCI sound card.
AC97 Modem
Auto
Select this option when using a primary or secondary
modem riser card, or audio/modem riser card.
Disabled
Select this option when using a PCI modem card.
IDE HDD Block Mode
Enabled
The IDE HDD uses the block mode. The system BIOS
will check the hard disk drive for the maximum block
size the system can transfer. The block size will depend
on the type of hard disk drive.
Disabled
The IDE HDD uses the standard mode.
Keyboard/Mouse Power On
This field allows you to use the keyboard or PS/2 mouse to power-
on the system. To use this function, make sure JP1 is set to 2-3 On -
the Wake-On-Keyboard/Mouse function enabled. Refer to “Jumper
Settings for Wake-On-Keyboard/Wake-On-Mouse” in chapter 2 for
more information.
Disabled
Default setting.
Warning:
If JP1 was previously enabled with a pass-
word set in the “KB Power On Password” field,
and now you wish to disable the keyboard
password function, make sure to set this field
to disabled prior to setting JP1 to disabled
(1-2 On). You will not be able to boot up the
system if you fail to do so.
Password
When this option is selected, move the cursor to
the “KB Power On Password” field and press
<Enter>. Enter your password. You can enter up to
5 characters. Type in exactly the same password to
confirm, then press <Enter>.
