59
3
Award BIOS Setup Utility
primarily differ in timing. When Auto is selected, the BIOS will select
the best available mode after checking your drive.
Auto
The BIOS will automatically set the system according to
your hard disk drive’s timing.
0-4
You can select a mode that matches your hard disk drive’s
timing. Caution: Do not use the wrong setting or you will
have drive errors.
IDE Primary Master/Slave UDMA and IDE Secondary Master/
Slave UDMA
These categories allow you to set the Ultra DMA in use. When Auto
is selected, the BIOS will select the best available option after
checking your hard drive or CD-ROM.
Auto
The BIOS will automatically detect the settings for you.
Disabled
The BIOS will not detect these categories.
USB Controller
We recommend that you leave this field in its default setting -
Enabled.
USB Keyboard Support
By default, USB Keyboard Support is Disabled. However, if you are
using a USB keyboard under DOS, make sure to enable this
function.
Init Display First
This field is used to select whether to initialize the onboard VGA or
PCI first when the system boots.
Onboard
When the system boots, it will first initialize the
onboard VGA.
PCI Slot
When the system boots, it will first initialize PCI.
