DFI SR100-L20C, User Manual

Page: 70 / 124

70
3
BIOS Setup
Security
<Enter> to change
password.
<Enter> again to
disable password.
BIOS SETUP UTILITY
Exit Chipset
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← →
Select Screen
↑↓
Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Main Advanced PCIPnP
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection [Disabled]
Boot Security
Change Supervisor Password
This field is used to set or change the supervisor password.
To set a new password:
1. Select the Change Supervisor Password field then press <Enter>.
2. Type your password in the dialog box then press <Enter>. You
are limited to eight letters/numbers.
3. Press <Enter> to confirm the new password.
4. When the Password Installed dialog box appears, select OK.
To change the password, repeat the same steps above.
To clear the password, select Change Supervisor Password then
press <Enter>. The Password Uninstalled dialog box will appear.
If you forgot the password, you can clear the password by erasing
the CMOS RTC (Real Time Clock) RAM using the Clear CMOS
jumper. Refer to the Jumper Settings section in chapter 2 for more
information.