62
3
BIOS Setup
Resume On PCI PME#
Enables the system to wake up to respond to PCI card such as
LAN card or modem card that uses the PCI PME (Power Manage-
ment Event) signal to remotely wake up the system. Access to the
LAN card or PCI card will cause the system to wake up.
USB Device Wakeup From S3/S4
This field, when enabled, allows you to use a USB device to wake up
a system that is in the S3 or S4 state.
Resume By RTC
Enables the RTC to wake up the system.
RTC Alarm Date (Days)
This is used to select a date you would like the system to power-on.
RTC Alarm Time
This is used to set the time you would like the system to power-on.
Restore on AC Power Loss
Power Off
When power returns after an AC power failure, the
system’s power is off. You must press the Power button
to power-on the system.
Power On
When power returns after an AC power failure, the
system will automatically power-on.
Last State
When power returns after an AC power failure, the
system will return to the state where you left off before
power failure occurs. If the system’s power is off when
AC power failure occurs, it will remain off when power
returns. If the system’s power is on when AC power
failure occurs, the system will power-on when power
returns.
