72
3
Award BIOS Setup Utility
USB Resume from S3
This function, when enabled, allows you to use a USB keyboard or
USB mouse to wake up a system that is in the S3 (STR - Suspend
To RAM) state.
VGA
When set to On, the system will respond and wake up to any VGA
activity.
LPT & COM
Select the port you would like the system to respond and wake up
when an event occurs on that port.
HDD & FDD
When set to On, the system will respond and wake up to any hard
drive or floppy drive activity.
PCI Master
When set to On, the system will respond and wake up to any PCI
or bus master activity.
Resume on PCI Event
Set this field to Enabled if your PCI card such as LAN card or
modem card uses the PCI PME (Power Management Event) signal
to remotely wake up the PC . Refer to the card’s documentation for
more information.
Resume On LAN/Ring
This field allows you to enable the Wake-On-LAN and Wake-On-Ring
functions.
•
If you are using a LAN card that suppor ts the remote wake up
function, set this field to Enabled. The will allow the network to
remotely wake up a Soft Power Down (Soft-Off) PC. However, if
your system is in the Suspend mode, you can wake up the system
only through an IRQ or DMA interrupt. Your LAN card must
support the remote wake up function. Refer to “Wake-On-LAN
Connector” in chapter 2 for more information.
