2
Hardware Installation
25
The mainboard is equipped with two onboard USB 2.0/1.1 por ts at
location CN1 (Black) of the mainboard. It is also equipped with J13
and J24 for connecting 4 additional external USB 2.0/1.1 por ts. The
USB 2.0/1.1 ports, which are mounted on a card-edge bracket, will
be provided as an option. If you wish to use the optional USB 2.0/
1.1 ports, install the card-edge bracket to the system chassis then
insert the connector that is attached to the USB 2.0/1.1 por t cables
to J13 or J24. The USB 2.0/1.1 por ts’ cable connector can be in-
ser ted only if pin 1 of the connector is aligned with pin 1 of J13 or
J24. Now connect the interface cable connector of your USB device
to the USB 2.0/1.1 por t that is on the bracket.
You can enable or disable the USB por ts in the Integrated Peripher-
als submenu (“OnChip USB Controller” field) of the BIOS.
The Wake-On-USB Keyboard/Mouse function allows you to use a
USB keyboard or USB mouse to wake up a system from the S3
(STR - Suspend To RAM) state.
To use this function:
“USB Resume from S3” (“IRQ/Event Activity Detect” field) in the
Power Management Setup submenu of the BIOS must be set to
Enabled. Refer to chapter 3 for more information.