DFI P5XV3, User Manual

Page: 52 / 78

3
52
P5XV3 System Board User’s Manual
Suspend Mode
This is user configurable only when the Power Management category
is set to User Defined. When enabled and after the set time of
system inactivity, the CPU and onboard peripherals will be shut off.
HDD Power Down
This is user configurable only when the Power Management category
is set to User Defined. When enabled and after the set time of
system inactivity, the hard disk drive will be powered down while
all other devices remain active.
Soft-Off by PWRBTN
This category allows you to select the method of powering off your
system.
Hold 4 Sec. Regardless of whether the Power Management field
is enabled or disabled, if the power button is pushed
and released in less than 4 sec, the system enters
the Suspend mode. The purpose of this function is
to prevent the system from powering off in case
you accidentally “hit” or pushed the power button.
Pushing the power button for more than 4 seconds
will power off the system.
Instant-Off Pressing and then releasing the power button at
once will immediately power off your system.
Resume On Ring
Enabled Enables the Modem Ring-on feature. This allows your
system to power on to respond to incoming calls. Make
sure to select an IRQ channel for the external modem
in the “Modem Use IRQ” field.
Disabled Disables the Modem Ring-on feature. Your system will
not respond to incoming calls.
Resume On Alarm
Enabled When Enabled, you can set the date and time you
would like the Soft Power Down (Soft-Off) PC to
power-on. “Date (of Month)” and “Timer (hh:mm:ss)”
will appear right below this field.