12
2
Hardware Installation
2.2 System Memory
2.3 DIP Switch and Jumper Settings of the
Processors
Make sure SW1 and JP5 are set correctly before applying power or
you may damage the processor or system board. There are 10
switches on SW1. The black rectangle in the diagram denotes the
part that is protruding, the adjustable switch.
In the example on the left:
Switch 1: Off Switch 6: Off
Switch 2: On Switch 7: Off
Switch 3: On Switch 8: Off
Switch 4: On Switch 9: Off
Switch 5: On Switch 10: On
Important:
If you are using a 100MHz ex-
ternal system bus clock processor,
make sure that you use PC-100
SDRAM DIMM
ONLY
. However,
if you encounter compatibility
problems, we recommend that
you try setting the SDRAM clock
according to the AGP clock (JP4
pins 1 and 2 On). This may help
solve some compatibility
problems.
