3
44
Award BIOS Setup Utility
The parallel modes are Normal, EPP, ECP and ECP+EPP. The default
is ECP+EPP. Both ECP Mode Use DMA and Parallel Port EPP Type
will appear on the screen.
If you selected EPP, Parallel Port EPP Type will appear. This field applies
to standard specification. The options are EPP1.9 and EPP1.7. Default
setting: EPP1.7.
If you selected ECP, ECP Mode Use DMA will appear. This is used
to select a DMA channel for the parallel port. The options are 1 and
3. Default setting: 3.
3.1.9 Supervisor Password
If you want to protect your system and setup from unauthorized entry,
set a supervisors password with the System option selected in the
BIOS Features Setup. If you want to protect access to setup only, but
not your system, set a supervisors password with the Setup option
selected in the BIOS Features Setup. You will not be prompted for a
password when you cold boot the system.
Use the arrow keys to highlight the Supervisor Password option and
press <Enter>. The message below will appear.
Enter Password:
Type in the password. You are limited to eight characters. When done,
the message below will appear:
Confirm Password:
You are asked to verify the password. Type in exactly the same
password. If you type in a wrong password, you will be prompted to
enter the correct password again. To delete or disable the password
function, highlight Supervisor Password and press <Enter>, instead of
typing in a new password. Press the <Esc> key to return to the main
menu.
