
25
2
Hardware Installation
2.6.8 CPU Fan Connector
The processor must be kept cool by using a fan with heatsink.
Connect the CPU fan to the 3-pin fan connector at location J12 on
the system board.
Pin
1
2
3
Function
GND
+12V
GND
Important:
There are 2 points to consider prior to installing an AGP card into
the AGP slot.
1. The length of the AGP card must not exceed 16.5cm. You will not be able
to install a card longer than this length because of the processor/fan/
heatsink located near the AGP slot.
2. When you install the AGP card and it hits the fan/heatsink, it may be that
the clip of the heatsink on this side is too high. Try to re-orient the fan/
heatsink so that the lower clip of the heatsink is on the side closest to
the AGP slot.