11
2
Hardware Installation
2.2 System Memory
2.3 DIP Switch Settings of the Processors
Make sure SW1 and JP3 are set correctly before applying power or
you may damage the processor or system board. There are 10
switches on SW1. The black rectangle in the diagram denotes the
part that is protruding, the adjustable switch.
Important:
If you are using a 100MHz ex-
ternal system bus clock
processor, make sure that you
use PC-100 SDRAM DIMM
ONLY
. Just in case you
encounter compatibility problems,
we recommend that you try
setting the SDRAM clock
according to the AGP clock (JP2
pins 1 and 2 On). This may help
solve some compatibility
problems.
In the example on the left:
Switch 1: Off Switch 6: Off
Switch 2: On Switch 7: Off
Switch 3: On Switch 8: Off
Switch 4: On Switch 9: Off
Switch 5: On Switch 10: On
