37
2
Hardware Installation
12. From the rear outside
of the chassis, insert the
shorter side of the 90
o
metal through the I/O
shield so that it goes
under the metal plate
which you have installed
in step 2.
13. Adjust the Transpiper so
that its fins faces the
power supply fan. This
will allow air from the
power supply to blow
directly on the fins of
the Transpiper. Tighten
the screws on the
Transpiper to secure it
in place.
Fasten screws on the
Transpiper’s bracket to
fix it in place.
I/O shield
Location where
the 90
o
metal is
inserted
Screws
Screws on
bracket
