29
2
Hardware Installation
2.5.4 Universal Serial Bus Ports
Four onboard USB 2.0/1.1 ports (Black) are at locations CN24
(USB 1-2) and CN26 (USB 3-4) of the system board.
J9 (USB 5-6) and J10 (USB 7-8) connectors allow you to con-
nect 4 additional USB 2.0/1.1 ports. Insert the connector that is
attached to the USB port cables to J9 or J10.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals
submenu (“VIA OnChip PCI Device” section) of the BIOS.
Driver Installation
You may need to install the proper drivers in your operating
system to use the USB device. Refer to your operating system’s
manual or documentation for more information.
If you are using a USB 2.0 device, install the “USB 2.0 Drivers”.
Refer to chapter 4 for more information.
USB 4
USB 3
"
USB 5-6
USB 7-8
"
USB 2
USB 1
1
VCC
-Data
+Data
Ground
Key
VCC
-Data
+Data
Ground
N.
C
.
2
10
9
!
