DFI KD632-C236 User Manual Download Page 40

Page: 40 / 80

www.dfi.com

Chapter 3 BIOS Setup

Chapter 3

Active Management Technology Support

The section allows users to enable or disable the Intel

Active Management Technology (Intel

AMT) BIOS extension. Please refer to

Chapter 6

for more information.

When disabled AMT

BIOS Features are no

longer supported and user

is no longer able to access

MEBx Setup.

Note :

This option does not dis

able Manageability Fea

tures in FW.

Active Management Technology Support

Intel AMT Support <Enabled>

Un-Configure ME <Disabled>

Advanced

Help

↑/↓

Select Item

F5/F6

Change Values

Setup Defaults

Esc

Exit

←/→

Select Item

Enter

Select



SubMenu

F10

Save and Exit

InsydeH2O Setup Utility

Rev. 5.0

Intel AMT Support

This field is used to enable or disable Intel

Active Management Technology BIOS

Extension.

Un-Configure ME

This field is used to enable or disable un-configuring ME without password.

MEBX Configuration

This section configures MEBX setting. Please refer to

Chapter 6

for more information.

Summary of Contents for KD632-C236

















































































Search results

Summary of Contents for KD632-C236

Reviews:

Related manuals for KD632-C236

Brands by name

Popular brands

DFI KD632-C236, User Manual

Search results

Summary of Contents for KD632-C236

Reviews:

Related manuals for KD632-C236

Brands by name

Popular brands